MARS Ball Valves
Three-piece cryogenic ball valves for service down to -196°C, with a vented ball, an ISO 5211 direct-mount pad and oxygen cleaning as standard. Threaded, welded and flanged ends.
4
Cryogenic series
-196°C
Minimum service temperature
ISO 5211
Direct-mount pad
Every MARS cryogenic ball valve shares these design features.
A vent in the ball stops pressure building up in the body cavity as trapped liquid warms and expands.
Every valve is marked with a flow arrow, so the vented side is always installed the right way round.
Every valve is oxygen cleaned as standard. Confirm your media when you ask for a quote.
A solid, high-strength 17-4 PH stainless stem keeps the ball turning reliably under high cryogenic torque.
The mounting pad and square shaft let an actuator bolt straight on, with no bracket or coupling, for easy, low-cost automation.
Configure onlineSeries 84C-10/20/30
Design
3-piece cryogenic
Port
Full port
Mount
ISO 5211
Size
1/4" – 4"
Ends
Threaded, Socket Weld, Butt Weld
Body
CF8M (alloys on request)
Seats
TFM4215 / PCTFE
Temperature
-196 to +95°C
Configure onlineSeries 89C-10/20/30/60
Design
3-piece cryogenic
Port
Full port
Mount
ISO 5211
Size
1/2" – 4"
Ends
Threaded, SW, BW, Flanged
Pressure Rating
2250 PSI · ANSI #150/300/600
Body
CF8M / WCB
Seats
PCTFE / Metal seat
Temperature
-196 to +120°C
Configure onlineSeries CG3D-10/20/30
Design
3-piece cryogenic
Port
Full port
Mount
ISO 5211 Direct Mount
Size
1/4" – 4"
Pressure Rating
2000 PSI
Ends
Threaded, Socket Weld, Butt Weld
Body
CF8M
Seats
PCTFE
Temperature
-196 to +95°C
Configure onlineSeries CG3D-50
Design
3-piece cryogenic flanged
Port
Full port
Mount
ISO 5211 Direct Mount
Size
1/2" – 4"
Ends
ANSI #300 Flanged
Body
CF8M
Seats
PCTFE
Temperature
-196 to +95°C
| Series | Port | Pressure | Mounting | Fire safe |
|---|---|---|---|---|
| Series 84C-10/20/30 | Full port | — | Standard | — |
| Series 89C-10/20/30/60 | Full port | 2250 PSI · ANSI #150/300/600 | Standard | — |
| Series CG3D-10/20/30 | Full port | 2000 PSI | Standard | — |
| Series CG3D-50 | Full port | — | Standard | — |
They are designed for service down to -196°C, which covers liquid nitrogen and similar cryogenic media. Upper temperature limits vary by series; see each series card.
Cryogenic liquid trapped in the ball cavity expands as it warms, which can build dangerous pressure. A vent in the ball releases it to one side of the valve. That is why every valve is marked with a flow direction arrow and must be installed the right way round.
Yes. The ISO 5211 mounting pad and square shaft let a pneumatic or electric actuator bolt directly onto the valve, with no bracket or coupling needed.
Oxygen cleaning is standard on MARS cryogenic ball valves. Tell us your media, pressure and temperature when you ask for a quote and we'll confirm the right specification.
Threaded, socket weld and butt weld, plus ANSI Class 150/300 and DIN PN 10-40 flanges, depending on the series.
Send us the size, pressure, temperature, end connection and media, and we'll recommend the right series with a price.